MARE's Computer Vision Study.
MareArts blog / Computer Vision & Artificial Intelligent Systems
avrdude stk500_recv() programmer is not responding Error ( simple solution in my case.. ), Arduino beginner
I meet the error message when I upload source code to the board.
In my case, I set correct board type, at the tools->board menu.
On the Mac, you can see your board type at the system information application.
Change you correct board type and try again.
In my case, communication port is like this picture.
December 10, 2013
Share to Twitter
Share to Facebook
Share to Pinterest
Post a Comment
Post Comments (Atom)
Real-time N camera stitching Class.
As you can see in the following video, I created a class that stitching n cameras in real time. https://www.youtube.com/user/feelmare/sear...
(OpenCV, data type change, copy) vector to Mat, Mat to vector
This post is about how to copy Mat data to vector and copy vector data to Mat. Reference this example source code. printf("///////...
OpenCV Stitching example (Stitcher class, Panorama)
Image size of origin is 320*240. Processing time is 30.96 second took. The result of stitching The resul...
Real-time stitching multi-video to one screen
* Introduction - The solution shows panorama image from multi images. The panorama images is processing by real-time stitching algorithm...
yuv422(YUYV) to RGB and RGB to yuv422(YUYV), (Using OpenCV and TBB)
In past, I wrote an articel about YUV 444, 422, 411 introduction and yuv <-> rgb converting example code. refer to this page -> ht...
OpenCV Drawing Example, (line, circle, rectangle, ellipse, polyline, fillConvexPoly, putText, drawContours)
line, circle, rectangle, ellipse, polyline, fillConvexPoly, putText, drawContours example source code!!. ... //http://study....
Example source code of extract HOG feature from images, save descriptor values to xml file, using opencv (using HOGDescriptor )
This example source code is to extract HOG feature from images. And save descriptors to XML file. The source code explain how to use HOGD...
Image warping (using opencv findHomography, warpPerspective)
fig 1. Left: set 4 points (Left Top, Right Top, Right Bottom, Left Bottom), right:warped image to (0,0) (300,0), (300,300), (0,300) Fi...
OpenCV Background subtraction 3.2 version example (for MOG, MOG2, GMG, KNN)
This is example for background subtraction on opencv 3.2 version previously, I post 2.7 version example on here. http://study.marearts.co...
SICK LMS511 sensor data acquisition interface (source code, C++/MFC)
This is data acquisition source code of LMS511(SICK co.) Source code is made by MFC(vs 2008). The sensor is communicated by TCP/IP. ...